Views:333 Author:Site Editor Publish Time: 2021-08-09 Origin:Site
A hydraulic profile bending machine is a machine that can bend thin plates. Its structure mainly includes a bracket, a working table, and a clamping plate. The working table is placed on the bracket. The working table is composed of a base and a pressing plate. The base is connected with a hinge and a clamping plate. Connected, the base is composed of a seat shell, a coil, and a cover plate, the coil is placed in the recess of the seat shell, and the top of the recess is covered with a cover plate.
What are the working components of the hydraulic profile bending machine?
What are the steps of operating the profile bending machine?
What is the example of a profile bending machine?
The hydraulic profile bending machine includes a bracket, a workbench, and a clamping plate. The workbench is placed on the bracket. The workbench is composed of a base and a pressure plate. The base is connected to the clamping plate through a hinge. The base is composed of a housing, a coil, and a cover. The coil is placed in the recess of the seat shell, and the top of the recess is covered with a cover plate, so the structure is so complicated.
1. First, turn on the power, turn on the key switch on the control panel, and then press the oil pump to start, so you can hear the sound of the oil pump rotating. (The machine does not operate at this time)
2. The stroke adjustment, the use of the profile bending machine must pay attention to the adjustment stroke, be sure to test run before bending. When the upper die of the profile bending machine descends to the bottom, there must be a gap of plate thickness. Otherwise, it will cause damage to the mold and the machine. The stroke adjustment also has electric quick adjustment and manual stomach adjustment.
3. For the selection of bending notches, a notch with a width of 8 times the thickness of the plate should generally be selected. If you bend a 4mm sheet, you need to choose a slot of about 32.
Section Bending Machine
Section bending machine has 3 rolls which are driven by hydraulic motors and gears. Both side rolls are hydraulically driven to move vertically and can rotate around a fixed axis to perform curved vertical moving. A carrier roll and a correcting guide roll are respectively arranged at both sides of the working roll to ensure the quality of the rolling section with asymmetric cross-section (such as angle steel). It can roll various sections including U-beam, angle steel, flat steel, circular tube, square tube, etc.
The profile bending machine is a curved 3-roll section bending machine and can pre-bend the section. The machine mainly comprises a body, side rolls, a carrier roll, a transmission part, an electric part, a hydraulic system and dies.
As an important part of automated production, the profile bending machine has attracted more and more people's attention. ChaoLi Company is committed to providing various bending machines and rolling machines with high quality for all customers from all over the world.